Loading Frames

Product

“LYNX” machines are simple in design and robust in construction to ensure trouble free operation. Large hand wheels are provided in the manually operated machines for ease of operation. Hand wheels are  provided  in  the  electrical  versions  too,  for  operation  during power failure. The machines are primarily intended for triaxial test on samples  upto 100 mm. diameter, but can be fitted with relevant accessories  for Unconfined and CBR tests as well. Each loading frame is fully  overloaded and tested so that it can operate at full speed under full load conditions.

LM17103

LM17105

 

LM17101 : LOADING  FRAME  (HAND  OPERATED)

 

Bench type - 50 kN capacity with two speed.

   
  LM17102 : LOADING  FRAME  (HAND  OPERATED)
  Bench type - 50 kN capacity with two speed, complete with adjustable top bracket and dial gauge holder.
   
 

LM17103 : LOADING  FRAME  (MOTORISED)

Bench type 50 kN capacity with a single speed of 1.25 mm./min.
Wired for 230V., sph. 50 Hz.

   
 

LM17104 : LOADING  FRAME

 

Bench type - 50kN capacity. Similar to LM17103, but with three speed 1.25 mm./min.,1.5mm./min. and 2.5 mm./min.
Wired for 230V., sph. 50 Hz.

   
  LM17105 : LOADING FRAME (MOTORISED)
 

50 kN capacity. This is intended for accommodating universal triaxial cells. It has the following speed rates 1.25, 0.625, 0.5, 0.25, 0.125, 0.0625, 0.05,
0.025 mm./min. This is supplied in an elegant free standing console, complete with on/off, reverse switch, pilot lamp and speed chart.
Wired for 230V., sph. 50 Hz.

   
  LM17106 : LOADING  FRAME
 

Similar to LM17105, but with 30 speed derived from a turret type motor drive unit. The speed ranges from 6 mm./min. to 0.00048 mm./min.
Wired for 230V., sph. 50 Hz.

   
 

LM17107 :  LOADING   FRAME - 100 kN capacity.

 

Similar to LM17105, but with a higher capacity. Wired for 230V., sph. 50 Hz.

   
  LM17108 : LOADING  FRAME - 100 kN capacity.
   

Similar to  LM17106, but with a higher capacity. Wired for 230V., sph. 50 Hz.

     
    LM17109: LOADING  FRAME
   

100 kN capacity. Similar to LM17107, but with 72 speed.
Wired for 230V., sph. 50 Hz.

Copyright © Lawrence & Mayo 2017

Maintained and Developed by TechnoCraft Computers